Need help?Do you have a question about the NETGEAR ProSAFE S3300 and is the answer not in the manual?
General| Uplink Ports | 4 x 10G SFP+ |
|---|---|
| Power Supply | Internal power supply |
| Switching Capacity | 176 Gbps (52-port) |
| Management | Web-based, SNMP |
| Dimensions | 17.3 x 1.7 in |
| Forwarding Rate | 131 Mpps (52-port models) |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -20° to 70° C (-4° to 158° F) |
| Humidity | 90% maximum relative humidity, noncondensing |
Provides a summary of the NETGEAR ProSAFE S3300 Smart Switch models and their specifications.
Details the key hardware capabilities and features of the S3300 Smart Switch series.
Explains how to configure and manage multiple S3300 switches as a stack for increased capacity.
Outlines the environmental and physical requirements for installing the smart switch.
Provides instructions for mounting the smart switch on a flat surface or in a rack.
Lists common symptoms, their causes, and recommended solutions for troubleshooting switch issues.
To Next Page