NETGEAR ProSAFE S3300 User Manual

5
1
1. Introduction
The NETGEAR
®
ProSAFE
®
S3300 Smart Switch is a high-performance, IEEE-compliant,
stackable switch with either 48 (models S3300-52X and S3300-52X-PoE+) or 24 (models
S3300-28X and S3300-28X-PoE+) twisted-pair ports on the front panel to support
10/100/1000 Mbps networks. In addition, the front panel provides two dedicated 10GBASE-T
ports and two dedicated SFP+ ports for connections to a server or network backbone.
Y
ou can
configure the dedicated 10GBASE-T and SFP+ ports as stacking links to build a stack system
with other S3300 switches. To simplify installation, the smart switch is shipped ready for use out
of the box.
This hardware installation guide complements the installation guide that came with your smart
switch.
This chapter serves as an introduction to the smart switch and includes the following sections:
• Hardware Overview
• Hardware Features
• Stacking
• Package Contents
Note: For more information about the topics that are covered in this manual,
visit the support website at support.netgear.com.
Note: In this manual, the S3300 Smart Switch is referred to as the smart switch.

NETGEAR ProSAFE S3300 Specifications

General

Uplink Ports	4 x 10G SFP+
Power Supply	Internal power supply
Switching Capacity	176 Gbps (52-port)
Management	Web-based, SNMP
Dimensions	17.3 x 1.7 in
Forwarding Rate	131 Mpps (52-port models)
VLAN Support	Yes
Jumbo Frame Support	Yes
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Humidity	90% maximum relative humidity, noncondensing