24
4
4. Installation
This chapter describes the installation procedures for the S3300 Smart Switch. Switch
installation involves the steps described in the following sections:
Step 1: Prepare the Site
Step 2: Install the Switch
Step 3: Check the Installation
Step 4: Connect Devices to the Switch
Step 5: Install an SFP Transceiver Module
Step 6: Install the Smart Switch as a Stack Master or Stack Slave
Step 7: Apply AC Power
Step 8: Install the RPS and Apply RPS DC Power
Step 9: Manage the Switch Through a Web Browser or the Smart Control Center Utility
To Next Page
Loading...
