NETGEAR ProSAFE S3300 User Manual

Introduction
9
S3300 Smart Switch
Package Contents
The following figure shows the package contents of the S3300 Smart Switch. The figure
shows model S3300-52X. However, the package contents for the other models are the same.
Figure 1. Package contents
Verify that the package contains the following:
• S3300 Smart Switch
• Rubber footpads for tabletop installation
• Rack-mounting kit
• Power cord
• Quick installation guide
• Smart switch resource CD with NETGEAR Smart Control Center and a link to the S3300
Smart Switch Software
Administration Manual.
If any item is missing or damaged, contact the vendor immediately
.

NETGEAR ProSAFE S3300 Specifications

General

Uplink Ports	4 x 10G SFP+
Power Supply	Internal power supply
Switching Capacity	176 Gbps (52-port)
Management	Web-based, SNMP
Dimensions	17.3 x 1.7 in
Forwarding Rate	131 Mpps (52-port models)
VLAN Support	Yes
Jumbo Frame Support	Yes
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Humidity	90% maximum relative humidity, noncondensing