LAN Configuration
104
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Stateful DHCPv6 Server
The IPv6 clients in the LAN obtain an interface IP address, configuration information such as
DNS server information, and other parameters from the DHCPv6 server. The IP address is a
dynamic address. For stateful DHCPv6, you need to configure IPv6 address pools (see IPv6
LAN Address Pools on page 106).
Configure the IPv6 LAN
To configure the IPv6 LAN settings:
1. Select Network Configuration > LAN Settings.
2. In the upper right of the screen, select the IPv6 radio button.
The LAN Setup screen displays
the IPv6 settings. (The following figure contains some examples.)
Figure 58.
To Next Page
Loading...
