NETGEAR ProSAFE SRX5308 - Configure Applications for Port Forwarding

Virtual Private Networking Using SSL Connections
282
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
For information about how to configure domains, groups, and users, see Configure
Authentication Domains, Groups, and Users on page 303.
Configure Applications for Port Forwarding
• Add Servers and Port Numbers
• Add a New Host Name
Port forwarding provides access to specific defined network services. To define these
services, you need to specify the internal server addresses and port numbers for
TCP
applications that are intercepted by the port forwarding client on the user
’s computer. This
client reroutes the traffic to the VPN firewall.
Note: SSL VPN port forwarding is supported for IPv4 connections only.
Add Servers and Port Numbers
To configure port forwarding, you need to define the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users.
 To add a server and a port number:
1. Select VPN > SSL VPN > Port Forwarding. The Port Forwarding screen displays. (The
following figure shows an example.)
Figure 186.