Virtual Private Networking Using IPSec and L2TP Connections
216
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Note: Perform these tasks from a computer that has the NETGEAR
ProSafe VPN Client installed. The VPN Client supports IPv4 only; a
future release of the VPN Client might support IPv6.
To use the Configuration Wizard to set up a VPN connection between the VPN client
and the VPN firewall:
1. Right-click the VPN client icon in your Windows system tray, and select Configuration
Panel. The Configuration Panel screen displays:
Figure 138.
2. From the main menu on the Configuration Panel screen, select Configuration > Wizard.
The Choice of the remote equipment wizard screen (screen 1 of 3) displays:
To Next Page
Loading...
