Virtual Private Networking Using IPSec and L2TP Connections
218
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 141.
6. This screen is a summary screen of the new VPN configuration. Click Finish.
7. Specify the local and remote IDs:
a. In the tree list pane of the Configuration Panel screen, click Gateway (the default
name given to the authentication phase).
The
Authentication pane displays in the
Configuration Panel screen, with the Authentication tab selected by default.
b. Click the Advanced tab in the Authentication pane.
The Advanced pane displays:
Figure 142.
To Next Page
Loading...
