Virtual Private Networking Using IPSec and L2TP Connections
221
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Configure the Authentication Settings (Phase 1 Settings)
To create new authentication settings:
1. Right-click the VPN client icon in your Windows system tray, and select Configuration
Panel
. The Configuration Panel screen displays:
Figure 144.
2. In the tree list pane of the Configuration Panel screen, right-click VPN Configuration, and
select New Phase 1.
Figure 145.
3. Change the name of the authentication phase (the default is Gateway):
a. Right-click the authentication phase name.
b. Select Rename.
c. T
ype vpn_client
.
d. Click anywhere in the tree list pane.
To Next Page
Loading...
