NETGEAR ProSAFE SRX5308 - Page 305

Manage Users, Authentication, and VPN Certificates
305
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 202.
3. Complete the settings as described in the following table:
Table 76. Add Domain screen settings
Setting Description
Domain Name A descriptive (alphanumeric) name of the domain for identification and
management purposes.
Authentication Type
Note:
If you select
any type of RADIUS
authentication, make
sure that one or more
RADIUS servers are
configured (see
RADIUS Client and
Server Configuration
on page 247).
From the drop-down list, select the authentication method that the VPN firewall
applies:
• Local User Database (default). Users are authenticated locally on the VPN
firewall.
This is the default setting.
You do not need to complete any other
fields on this screen.
• Radius-P
AP. RADIUS Password
Authentication Protocol (PAP). Complete the
following fields:
- Authentication Server
- Authentication Secret
• Radius-CHAP. RADIUS Challenge Handshake
Authentication Protocol
(CHAP). Complete the following fields:
- Authentication
Server
- Authentication Secret
• Radius-MSCHAP. RADIUS Microsoft CHAP
. Complete the following fields:
- Authentication
Server
- Authentication Secret
• Radius-MSCHAPv2. RADIUS Microsoft CHAP version 2. Complete the
following fields:
- Authentication Server
- Authentication Secret
• WIKID-P
AP. WiKID Systems P
AP. Complete the following fields:
- Authentication Server
- Authentication Secret
• WIKID-CHAP. WiKID Systems CHAP
. Complete the following fields:
- Authentication
Server
- Authentication Secret