NETGEAR ProSAFE SRX5308 - Page 409

Default Settings and Technical Specifications
409
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
VPN IPsec Wizard: IKE policy settings for IPv4 gateway-to-client tunnels
Exchange mode Aggressive
ID type FQDN
Local W
AN ID remote.com
Remote WAN ID local.com
Encryption algorithm 3DES
Authentication algorithm SHA-1
Authentication method Pre-shared Key
Key group DH-Group 2 (1024 bit)
Life time 8 hours
VPN IPsec Wizard: VPN policy settings for IPv4 gateway-to-client tunnels
Encryption algorithm 3DES
Authentication algorithm
SHA-1
Life time 1 hour
Key group DH-Group 2 (1024 bit)
NetBIOS Disabled
RADIUS settings
Primary RADIUS server Disabled and none configured
Secondary RADIUS server
Disabled and none configured
RADIUS time-out period 30 seconds
RADIUS maximum retry count 4
SSL VPN settings
SSL VPN IPv4 client address range 192.168.251.1–192.168.251.254
SSL VPN IPv6 client address range
4000::1–4000::200
User
, group, and domain settings
default domain geardomain
default group geardomain
default users, default passwords
admin, password
guest, password
Table 100. VPN firewall factory default configuration settings (continued)
Feature Default Behavior