EasyManua.ls Logo

NETGEAR ProSAFE SRX5308 - Page 437

NETGEAR ProSAFE SRX5308
469 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Logs and Error Messages
437
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
PPPoE Idle Timeout Logs
PPTP Idle T
imeout Logs
Table 118. System logs: WAN status, PPPoE idle time-out
Message Nov 29 13:12:46 [SRX5308] [pppd] Starting connection
Nov 29 13:12:49 [SRX5308] [pppd] Remote message: Success
Nov 29 13:12:49 [SRX5308] [pppd] PAP authentication succeeded
Nov 29 13:12:49 [SRX5308] [pppd] local IP address 50.0.0.62
Nov 29 13:12:49 [SRX5308] [pppd] remote IP address 50.0.0.1
Nov 29 13:12:49 [SRX5308] [pppd] primary DNS address 202.153.32.3
Nov 29 13:12:49 [SRX5308] [pppd] secondary DNS address 202.153.32.3
Nov 29 11:29:26 [SRX5308] [pppd] Terminating connection due to lack of
activity.
Nov 29 11:29:28 [SRX5308] [pppd] Connect time 8.2 minutes.
Nov 29 11:29:28 [SRX5308] [pppd] Sent 1408 bytes, received 0 bytes.
Nov 29 11:29:29 [SRX5308] [pppd] Connection terminated.
Explanation Message 1: PPPoE connection started.
Message 2: Message from PPPoE server for correct login.
Message 3: Authentication for PPP succeeded.
Message 4: Local IP address assigned by the server.
Message 5: Server side IP address.
Message 6: The primary DNS server that is configured on the WAN ISP
Settings screen.
Message 7: The secondary DNS server that is configured on the WAN ISP
Settings screen.
Message 8: The PPP link has transitioned to idle mode. This event occurs
if there is no traffic from the LAN network.
Message 9: The time in minutes for which the link has been up.
Message 10: Data sent and received at the LAN side while the link was up.
Message 11: PPP connection terminated after idle time-out.
Recommended action To reconnect during idle mode, initiate traffic from the LAN side.
Table 119. System logs: WAN status, PPTP idle time-out
Message Nov 29 11:19:02 [SRX5308] [pppd] Starting connection
Nov 29 11:19:05 [SRX5308] [pppd] CHAP authentication succeeded
Nov 29 11:19:05 [SRX5308] [pppd] local IP address 192.168.200.214
Nov 29 11:19:05 [SRX5308] [pppd] remote IP address 192.168.200.1
Nov 29 11:19:05 [SRX5308] [pppd] primary DNS address 202.153.32.2
Nov 29 11:19:05 [SRX5308] [pppd] secondary DNS address 202.153.32.2
Nov 29 11:20:45 [SRX5308] [pppd] No response to 10 echo-requests
Nov 29 11:20:45 [SRX5308] [pppd] Serial link appears to be disconnected.
Nov 29 11:20:45 [SRX5308] [pppd] Connect time 1.7 minutes.
Nov 29 11:20:45 [SRX5308] [pppd] Sent 520 bytes, received 80 bytes.
Nov 29 11:20:51 [SRX5308] [pppd] Connection terminated.

Table of Contents

Other manuals for NETGEAR ProSAFE SRX5308

Related product manuals