NETGEAR ProSAFE SRX5308 - Page 59

IPv4 and IPv6 Internet and WAN Settings
59
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 33.
4. In the Internet Address section of the screen, from the IPv6 drop-down list, select Static
IPv6.
5. In the Static IP Address section of the screen, enter the settings as described in the following
table.
You should have received static IPv6 address information from your IPv6 ISP:
Table 9. WAN ISP IPv6 Settings screen settings for a static IPv6 address
Setting Description
IPv6 Address The IP address that your ISP assigned to you. Enter the address in one of the
following formats (all four examples specify the same IPv6 address):
• 2001:db8:0000:0000:020f:24ff:febf:dbcb
• 2001:db8:0:0:20f:24ff:febf:dbcb
• 2001:db8::20f:24ff:febf:dbcb
• 2001:db8:0:0:20f:24ff:128.141.49.32
IPv6 Prefix Length The prefix length that your ISP assigned to you, typically 64.
Default IPv6 Gateway
The IPv6 IP address of the ISP’
s default IPv6 gateway.
Primary DNS Server The IPv6 IP address of the ISP’s primary DNS server.
Secondary DNS Server The IPv6 IP address of the ISP’s secondary DNS server.