NETGEAR ProSAFE WN203

Command-Line Reference
113
ProSAFE Single Band 802.11n Wireless Access Point WN203
| |-name --Access point name
| |
| |-no> --Reset
| | |-dhcp> --DHCP server settings
| | | |-dns1 --DNS1 server
| | | |-dns2 --DNS2 server
| | | |-wins1 --WINS1 server
| | | |-wins2 --WINS1 server
| | |-radius> --RADIUS server setting
| | | |-primary> --Primary RADIUS server
| | | | |-auth port --Authentication port
| | | | |-auth secret --Authentication shared secret
| | | | |-auth server --Authentication server IP
| | | | |-acct port --Accounting port
| | | | |-acct secret --Accounting shared secret
| | | | |-acct server --Accounting server IP
| | | |-secondary> --Secondary RADIUS server
| | | | |-auth port --Authentication port
| | | | |-auth secret --Authentication shared secret
| | | | |-auth server --Authentication server IP
| | | | |-acct port --Accounting port
| | | | |-acct secret --Accounting shared secret
| | | | |-acct server --Accounting server IP
| |-radio> --Wireless LAN interface setting
| | |-2.4 --2.4 GHz wireless LAN status
| | |-2.4> --2.4 GHz wireless LAN interface setting
| | | |-80211d --802.11D
| | | |-aggregation-length --Aggregated packet size
| | | |-ampdu --Aggregated MAC Protocol Data Unit
| | | |-beacon-interval --Wireless beacon period in TU(1024 us)
| | | |-channel --Wireless channel (depends on country
| | | | and wireless mode)
| | | |-channel auto --Set wireless channel to auto mode
| | | |-channel-width --Wireless channel width
| | | |-client-isolation --Client isolation status
| | | |-data-rate> --Wireless transmission date rate
| | | | |-best --Best date rate
| | | | |-mcs --Date rate (MCS Index)
| | | | |-rate --Date rate (in Mbps)
| | | |-dtim --Wireless DTIM period in beacon interval
| | | |-fragmentation-length --Wireless fragmentation threshold
| | | |-guard-interval --Guard interval (from interference from
| | | |
other transmissions)
| | | |-macacl add --Add wireless access control (ACL)
| | | |-macacl del --Delete wireless access control (ACL)
| | | |-macacl del all --Delete wireless access control (ACL)
| | | | database
| | | |-max-client --Maximum client
| | | |-power --Output power