NETGEAR ProSAFE WN203 - Page 117

Command-Line Reference
117
ProSAFE Single Band 802.11n Wireless Access Point WN203
| | | | | |-name --Profile name
| | | | | |-security-separation --Disable associated wireless client
| | | | | | communication
| | | | | |-ssid --Network name (1-32 chars)
| | | | | |-vlan --VLAN id
| | | | | |-wpa-passphrase --Wireless WPA passphrase
| | | | |
| | | |
| | | | |-4 --4th security profile enable
| | | | |-4> --4th security profile
| | | | | |-access-control --Access control enable
| | | | | |-access-control-policy --Access control policy enable
| | | | | |-authentication --Wireless authentication type
| | | | | |-authentication 8021x --Select wireless 802.1X authentication
| | | | | | type
| | | | | |-authentication open encryption --Select wireless open encryption
| | | | | |
authentication type
| | | | | |-authentication shared-key encryption --Wireless shared-key encryption
| | | | | |-broadcast --Broadcast enable
| | | | | |-dynamic-vlan --Dynamic VLAN id
| | | | | |-key-index> --WEP key index
| | | | | | |-1> --Key 1
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-2> --Key 2
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-3> --Key 3
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-4> --Key 4
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | |-name --Profile name
| | | | | |-security-separation --Disable associated wireless client
| | | | | | communication
| | | | | |-ssid --Network name (1-32 chars)
| | | | | |-vlan --VLAN id
| | | | | |-wpa-passphrase --Wireless WPA passphrase
| | | | |
| | | |
| | | | |-5 --5th security profile enable
| | | | |-5> --5th security profile
| | | | | |-access-control --Access control enable
| | | | | |-access-control-policy --Access control policy enable
| | | | | |-authentication --Wireless authentication type
| | | | | |-authentication 8021x --Select wireless 802.1X authentication
| | | | | | type