NETGEAR R8000P User Manual

5
Network Settings
The router comes ready for WiFi, Ethernet, and USB connections.You can customize the router’s network
settings.We recommend that you install the router and connect it to the Internet before you change its network
settings.
This chapter includes the following sections:
• View or Change WAN Settings on page 48
• Set Up a Default DMZ Server on page 49
• Change the Router’s Device Name on page 49
• Change the LAN TCP/IP Settings on page 50
• Specify the IP Addresses That the Router Assigns on page 51
• Disable the DHCP Server Feature in the Router on page 52
• Manage Reserved LAN IP Addresses on page 53
• Use the WPS Wizard for WiFi Connections on page 55
• Specify Basic WiFi Settings on page 55
• Change the WiFi Mbps Settings on page 57
• Change the WiFi Password or Security Level on page 57
• Set Up a Guest WiFi Network on page 58
• Control the WiFi Radios on page 59
• Set Up a WiFi Schedule on page 60
• Specify WPS Settings on page 60
• Use the Router as a WiFi Access Point on page 61
• Custom Static Routes on page 65
• Ethernet Port Aggregation on page 68
• Improve Network Connections With Universal Plug and Play on page 70
47

NETGEAR R8000P Specifications

General

Brand	NETGEAR
Model	R8000P
Category	Wireless Router
Language	English