NETGEAR RANGEMAX WNDR3300 User Manual

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
2-14 Safeguarding Your Network
v1.1, October 2008
Configuring Advanced WPS Settings
From the main menu, select Advanced Wireless Settings to display the following screen:
The WPS settings show the wireless router PIN, Disable Router’s PIN, and the Keep Existing
Wireless Settings check box.
By default, the Keep Existing Wireless Settings check box is cleared. This allows the wireless
router to automatically generate the SSID and WPA/WPA2 security settings when it implements
WPS. After WPS is implemented, the wireless router automatically selects this check box so that
your SSID and wireless security settings remain the same if you add WPS-enabled devices or if
you manually add non WPS-capable devices later.
Connecting Additional Wireless Client Devices After WPS
Setup
You can add more WPS clients to your wireless network, or you can add a combination of WPS-
enabled clients and clients without WPS.
Figure 2-8
Note: If you clear the Keep Existing Wireless Settings check box, all wireless settings
and connections will be lost.

NETGEAR RANGEMAX WNDR3300 Specifications

General

Brand	NETGEAR
Model	WNDR3300
Device Type	Wireless Router
Wireless Standards	802.11a/b/g/n
Maximum Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Frequency Band	2.4 GHz
Ethernet Ports	4
Antennas	2 internal antennas