ReadyNAS NV+ v2
25
ReadyNAS Duo v2 and NV+ v2
ļ To access the boot menu:
1. Power off your unit.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power on the unit.
4. Continue to press the Reset button until the status display screen shows a boot menu
message.
5. Press the Backup button to scroll through boot mode options.
The status display screen shows the current boot mode option.
6. When the status display screen shows the boot mode you need, press and release Reset
button to confirm your boot menu selection.
The system boots in the selected boot mode.
To Next Page
Loading...
Need help?
General
