NETGEAR RP614 - Web Safe Router User Manual

Reference Manual for the Model RP614 v2 Web Safe Router
Preparing Your Network C-17
Verifying TCP/IP Properties for Macintosh Computers
After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by
returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.
The panel is updated to show your settings, which should match the values below if you are using
the default TCP/IP settings that NETGEAR recommends:
• The IP Address is between 192.168.0.2 and 192.168.0.254
• The Subnet mask is 255.255.255.0
• The Router address is 192.168.0.1
If you do not see these values, you may need to restart your Macintosh or you may need to switch
the “Configure” setting to a different option, then back again to “Using DHCP Server”.

NETGEAR RP614 - Web Safe Router Specifications

General

Brand	NETGEAR
Model	RP614 - Web Safe Router
Category	Network Router
Language	English