Model GS308T: LEDs
This section describes the LED designations of model GS308T.
Table 1. Model GS308T LEDs on the front panel
DescriptionLED
Solid green. The switch is powered on and operating normally.
Solid yellow. The switch is booting.
Off. Power is not supplied to the switch.
Power LED
Off. No link is established.
Solid green. A valid 1 Gbps link is established.
Blinking green. The port is transmitting or receiving packets at 1 Gbps.
Solid yellow. A valid 10 Mbps or 100 Mbps link is established.
Blinking yellow. The port is transmitting or receiving packets at 10 Mbps or 100
Mbps.
RJ-45 left LED
Link, speed, and activity for
Ethernet ports 1 to 8
Hardware overview of model GS310TP
Model GS310TP provides eight 10/100/1000BASE-T RJ-45 PoE+ ports and two dedicated
Gigabit SFP fiber ports.
Model GS310TP: Front panel with ports and LEDs
The following figure shows the front panel of model GS310TP.
Figure 3. Model GS310TP front panel
From left to right, the front panel of model GS310TP provides the following components:
•
Power LED (see Model GS310TP: LEDs on page 14).
•
PoE Max LED (see Model GS310TP: LEDs on page 14), which is off (that is, not yellow)
in the previous figure.
•
Recessed Reset button (see Reset button on page 16).
Hardware Installation Guide13Hardware Overview
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch
To Next Page
Loading...
Need help?
General