NETGEAR WAG511 User Guide

3. The Autostart Wizard screen will appear, as shown here:
4. Click the
Install Driver & Utility option.
5. If the Autorun wizard does not automatically start, go to your Windows Start menu and choose
Run, and type D:/Setup.exe (“D” represents your CD-ROM drive letter), and click OK.
6. The InstallShield Wizard screen will appear.
7. Click Next to continue.
check your computer’s reference guide for more details.
• Windows
®
98/ME/2000/XP (be sure to have the Windows Installation CD-ROM ready
for use during installation).
• At least 5 Megabytes disk space for installing the driver and utility programs.
LED Indicators
The Wireless Link LED on the WAG511 802.11a/b/g Wireless PC Card indicates the wireless
link condition of the station with another wireless node or the associated Access Point.
Installation
Install the WAG511 Driver and Utility Software
IMPORTANT NOTE: You must first install the software before you plug the card into
your computer!
Follow these steps to install the WAG511 802.11a/b/g Wireless PC Card.
1. Turn on your computer.
2. Insert the WAG511 Resource CD into the CD-ROM drive.
3
1
1
2
LED Activity
Alternate Blinking
Meaning of LED Activity
Looking for a network association.
Associated or joined with the network; no activity.
Associated or joined with the network; activity on the network.
Slow-rate
Fast-rate

NETGEAR WAG511 Specifications

General

Brand	NETGEAR
Model	WAG511
Category	Computer Hardware
Language	English