5. Select the Disable radio button.
The fields are now unmasked.
6.
Specify the settings that are described in the following table.
DescriptionSetting
IP address in the range that is used by your LAN (usually 255.255.255.0).IP Address
The subnet mask must be compatible with your LAN.Subnet Mask
IP address of the gateway on your LAN.Gateway
IP address of the primary Domain Name System (DNS) server on your LAN.Primary DNS
IP address of the secondary DNS server on your LAN, or leave this field blank.Secondary DNS
7. Click the Apply button.
Your settings are saved. The access point restarts with the new IP settings.
Enable the DHCP client
By default, the DHCP client of the access point is enabled and the access point receives
an IP address from a DHCP server (or a router that functions as a DHCP server) in your
network.
If you disabled the DHCP client, you can reenable it.
User Manual124Manage the Local Area Network
and IP Settings
Insight Managed WiFi 6 AX3000 Access Point Model WAX615
To Next Page
Loading...
