NETGEAR WAX615

Unmount the access point
CAUTION: Make sure you hold the access point so that it does not drop when you
release it from the mounting plate.
To unmount the access point:
1.
Find the locking latch by placing your thumb on the center of the LEDs and your
finger on the other side of the access point, directly opposite the thumb.
2. Press and hold the latch down to release the lock and keep the lock open.
3.
Turn the access point counterclockwise until the access point releases from the
mounting plate.
User Manual247Mount the Access Point to a Wall
or Ceiling
Insight Managed WiFi 6 AX3000 Access Point Model WAX615