NETGEAR WAX615

•
WAX630E
•
WAC564
•
WAC540
Note: In a mesh WiFi network with WAX610, WAX610Y, WAX615, WAX620, WAX630,
or WAX630E models and WAC564 or WAC540 models, the WAC564 and WAC540
models must run firmware version 9.0 or a later version.
In the near future, more NETGEAR models might be added to the previous list.
Install the NETGEAR Insight app to manage
an Insight Instant Mesh WiFi network
Before you can add the access point to an Insight Instant Mesh WiFi network, you must
install the NETGEAR Insight app on an iOS or Android mobile device. The NETGEAR
Insight app is available for Insight Premium and Insight Pro subscribers.
For more information about the Insight app, visit
netgear.com/business/services/insight/subscription and
netgear.com/support/product/Insight.aspx.
To install the Insight app:
1.
On your mobile device, go to the app store, search for NETGEAR Insight, and
download the Insight app.
2. Launch the Insight app.
3.
If you do not already have a NETGEAR account, create one.
4.
Enter the email address and password for your NETGEAR account and tap Log in.
You can now set up the access point mesh WiFi connection (see Connect the access
point as an extender to a root access point on page 46).
User Manual45Install the Access Point in an
Insight Instant Mesh WiFi
Network
Insight Managed WiFi 6 AX3000 Access Point Model WAX615