EasyManua.ls Logo

NETGEAR WAX615

NETGEAR WAX615
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.
To view more detailed information, select Management > Monitoring > System.
The page shows four sections:
System Information section: The following settings are displayed:
- System Name: The access point NetBIOS name.
- System Mode: The access point system mode (AP).
-
LAN MAC Address: The MAC address of the LAN Ethernet port of the access
point.
-
Wireless MAC Address for 2.4 GHz: The MAC address of 2.4 GHz WiFi
interface (radio) of the access point.
-
Wireless MAC Address for 5 GHz: The MAC address of 5 GHz WiFi interface
(radio) of the access point.
-
Power Source: The type of power source (PoE 802.3at or Power Adapter).
-
Ethernet LLDP: The status of Ethernet LLDP feature (Enabled or Disabled).
-
Country / Region: The country or region in which the access point operates
or for which the access point is licensed.
-
Current Firmware Version: The version of the firmware that is running on
the access point.
-
Backup Firmware Version: The version of the backup firmware on the access
point.
- Bootloader Version: The primary bootloader (U-Boot) version that is installed
on the access point.
User Manual168Monitor the Access Point and the
Network
Insight Managed WiFi 6 AX3000 Access Point Model WAX615

Table of Contents

Related product manuals