NETGEAR WAX615

Table 3. Factory default settings (Continued)
Default Setting>Feature
Fixed multicast rate: Auto
Rate control: Disabled
Advanced rate selection
Basic radio settings that apply to all WiFi networks (SSIDs or VAPs)
2.4 GHz radio: Enabled
5 GHz radio: Enabled
Radio broadcast
2.4 GHz radio: 11ax mode, which also supports 11b, 11bg, and 11na
5 GHz radio: 11ax mode, which also support 11a, 11na, and 11ac
WiFi mode
2.4 GHz radio: 20 MHz
5 GHz radio: 40 MHz
Channel width
2.4 GHz radio: Long-800 ns
5 GHz radio: Long-800 ns
Guard interval
2.4 GHz radio: Maximum (100%)
5 GHz radio: Maximum (100%)
Output power
2.4 GHz radio: Auto
5 GHz radio: Auto
Channel
2.4 GHz radio: Enabled
5 GHz radio: Enabled
Wi-Fi Multimedia (WMM)
2.4 GHz radio: Enabled
5 GHz radio: Enabled
WMM Powersave
Advanced radio settings that apply to all WiFi networks (SSIDs or VAPs)
2.4 GHz radio: 128 default (also the maximum number)
5 GHz radio: 128 default (also the maximum number)
Number of WiFi clients
2.4 GHz radio: Enabled at 2346
5 GHz radio: Enabled at 2346
RTS threshold
2.4 GHz radio: 100 millisec.
5 GHz radio: 100 millisec.
Beacon interval
2.4 GHz radio: Disabled (QAM applies in the 11ng WiFi mode only)
5 GHz radio: Nonconfigurable
802.11n 256 QAM
2.4 GHz radio: Enabled
5 GHz radio: Enabled
MU-MIMO
2.4 GHz radio: 2
5 GHz radio: 2
DTIM interval
2.4 GHz radio: Enabled with a limit of 50 pps
5 GHz radio: Enabled with a limit of 50 pps
Broadcast and multicast
rate limiting
2.4 GHz radio: Not applicable
5 GHz radio: Disabled
802.11h
User Manual236Factory Default Settings and
Technical Specifications
Insight Managed WiFi 6 AX3000 Access Point Model WAX615