NETGEAR WGR614 v6 User Manual

Reference Manual for the 54 Mbps Wireless Router WGR614 v6
C-18 Preparing Your Network
202-10099-01, April 2005
• The default gateway is 192.168.1.1
4. Type exit
Configuring the Macintosh for TCP/IP Networking
Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On
each networked Macintosh, you will need to configure TCP/IP to use DHCP.
MacOS 8.6 or 9.x
1. From the Apple menu, select Control Panels, then TCP/IP.
The TCP/IP Control Panel opens:
2. From the “Connect via” box, select your Macintosh’s Ethernet interface.
3. From the “Configure” box, select Using DHCP Server.
You can leave the DHCP Client ID box empty.
4. Close the TCP/IP Control Panel.
5. Repeat this for each Macintosh on your network.
MacOS X
1. From the Apple menu, choose System Preferences, then Network.

NETGEAR WGR614 v6 Specifications

General

Model	WGR614 v6
Category	Wireless Router
Wireless Standard	802.11g
Wireless Speed	54 Mbps
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Security	WEP, WPA, WPA2
Firewall	NAT
Weight	0.66 lbs