Reference Manual for the 54 Mbps Wireless Router WGR614 v6
3 -2 C on figu rin g th e I n tern et a n d W ire le ss S e ttin gs
202-10099-01, April 2005
Initial Configuration
1. Insert the Resource CD into the CD drive on your PC. The following screen appears:
Figure 3-1: Smart Wizard Installation Assistant Startup screen
2.
Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
• How to change your cabling.
• How to connect to the Internet.
• How to configure your wireless settings.
– When you get to the wireless settings, you will have to select the country where you
are located and decide whether you want to have security on your wireless links
(Netgear strongly recommends enabling security).
– Depending on the type of security you select, you will also have to enter security key
or passphrase information (see “Wireless Settings” on page 3-9 for information on the
wireless authentication and encryption parameters).
Click SETUP
to get started
To Next Page
Loading...
Need help?
General
