EasyManuals Logo

NETGEAR WGR614 v6 User Manual

NETGEAR WGR614 v6
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Reference Manual for the 54 Mbps Wireless Router WGR614 v6
2-4 Introduction
202-10099-01, April 2005
IP Address Sharing by NAT
The WGR614 v6 router allows several networked computers to share an Internet account
using only a single IP address, which may be statically or dynamically assigned by your
Internet service provider (ISP). This technique, known as NAT, allows the use of an
inexpensive single-user ISP account.
Automatic Configuration of Attached computers by DHCP
The WGR614 v6 router dynamically assigns network configuration information, including
IP, gateway, and domain name server (DNS) addresses, to attached computers on the LAN
using the Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies
configuration of computers on your local network.
DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the router provides its own
address as a DNS server to the attached computers. The router obtains actual DNS addresses
from the ISP during connection setup and forwards DNS requests from the LAN.
PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as Entersys or WinPOET on your computer.
Easy Installation and Management
You can install, configure, and operate the 54 Mbps Wireless Router WGR614 v6 within minutes
after connecting it to the network. The following features simplify installation and management
tasks:
Browser-based management
Browser-based configuration allows you to easily configure your router from almost any type
of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup Wizard is
provided and online help documentation is built into the browser-based Web Management
Interface.
Smart Wizard
The WGR614 v6 router Smart Wizard automatically senses the type of Internet connection,
asking you only for the information required for your type of ISP account.
Firmware Update
The WGR614 v6 router can be updated if a newer version of firmware is available. This lets
you take advantage of product enhancements for your WGR614 v6 as soon as they become
available.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WGR614 v6 and is the answer not in the manual?

NETGEAR WGR614 v6 Specifications

General IconGeneral
ModelWGR614 v6
CategoryWireless Router
Wireless Standard802.11g
Wireless Speed54 Mbps
Frequency Band2.4 GHz
LAN Ports4 x 10/100 Mbps
WAN Port1 x 10/100 Mbps
SecurityWEP, WPA, WPA2
FirewallNAT
Weight0.66 lbs

Related product manuals