Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Wireless Configuration 4-9
April 2004, 202-10018-02
9.
Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID that you configured in
the router. Check that they have a wireless link and are able to obtain an IP address by DHCP
from the router.
Once your computers have basic wireless connectivity to the router, then you can configure the
advanced wireless security functions of the router.
Understanding Advanced Wireless Settings
After you have configured your basic wireless settings, you can set up the advanced security
features and Wireless Card Access List.
1. Under the Advanced Section of the main menu of the WGT634U router, click the Wireless
Settings link to display the Advanced Wireless Settings screen.
Figure 4-5: Advanced Wireless Settings screen
Note: If you are configuring the router from a wireless computer and you change the
router’s SSID, channel, or security settings, you will lose your wireless connection when
you click Apply. You must then change the wireless settings of your computer to match
the router’s new settings.
To Next Page
Loading...
