EasyManua.ls Logo

NETGEAR WGT634U - Using LAN IP Setup Options

NETGEAR WGT634U
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Advanced Configuration 8-7
April 2004, 202-10018-02
7.
If your dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the Use wildcards check box to activate this feature. For example, the wildcard feature
will cause *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org
8. Click Apply to save your configuration.
Using LAN IP Setup Options
The LAN IP Setup feature is under the Advanced heading of the main menu. This feature allows
configuration of LAN IP services such as DHCP and RIP. From the main menu of the browser
interface, under Advanced, click LAN IP Setup to view the LAN IP Setup menu, shown below.
Figure 8-3: LAN IP Setup Menu
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act as a
DHCP server. The router’s default LAN IP configuration is:
LAN IP addresses — 192.168.1.1
Subnet mask — 255.255.255.0

Table of Contents

Other manuals for NETGEAR WGT634U

Related product manuals