NETGEAR WIRELESS-G ROUTER WGR614V10 User Manual

Wireless-G Router WGR614v10 Reference Manual
Configuring Basic Connectivity 1-3
v1.0, February 2010
The Checking for Firmware Updates screen appears unless you previously cleared the Check
for Updated Firmware Upon Log-in check box.
This message displays if the router discovers that new firmware is available. (If no new
firmware is available, the router will proceed to the router status screen.)
To automatically update to the new firmware, click Yes to allow the router to download
and install the new firmware file from NETGEAR.
The update process typically takes about 1 minute. When the upload is complete, your router
automatically restarts.
3. If there is no new firmware, the login will take you to the Basic Settings screen displayed here.
Figure 1-2
Figure 1-3
Warning: When uploading firmware to the Wireless-G Router, do not interrupt
the Web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, it could corrupt the firmware.

NETGEAR WIRELESS-G ROUTER WGR614V10 Specifications

General

Brand	NETGEAR
Model	WIRELESS-G ROUTER WGR614V10
Category	Wireless Router
Language	English