NETGEAR WIRELESS-G ROUTER WGR614V10 User Manual

Wireless-G Router WGR614v10 Reference Manual
Using Network Monitoring Tools 6-6
v1.0, February 2010
Viewing a List of Attached Devices
The Attached Devices screen contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under Maintenance, select Attached
Devices to view the table.
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Managing the Configuration File
The configuration settings of the Wireless-G Router are stored within the router in a configuration
file. You can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
From the main menu of the browser interface, under Maintenance, select Backup Settings.
Figure 6-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Figure 6-5

NETGEAR WIRELESS-G ROUTER WGR614V10 Specifications

General

Brand	NETGEAR
Model	WIRELESS-G ROUTER WGR614V10
Category	Wireless Router
Language	English