NETGEAR Wireless Router Setup Manual
4-6 Optimizing Wireless Connectivity and Security
August 2004
Default Factory Settings
When you first receive your wireless router, the default factory settings are shown below. You can
restore these defaults with the Factory Default Restore button on the rear panel. After you install
the wireless router, use the procedures below to customize any of the settings to better meet your
networking needs.
Warning: The Network Name (SSID) is case sensitive. Typing nETgear for SSID will not work.
WIRELESS FEATURE DEFAULT SETTING
Wireless Access Point Enabled
Wireless Access List (MAC Filtering) All wireless stations allowed
SSID broadcast Enabled
Wireless Network Name (SSID) NETGEAR
Security Not Enabled
To Next Page
Loading...
