NETGEAR WN2000RPTv2 User Manual

13
2
2. Extender Network Settings
This chapter covers the following topics:
• Connect the Extender to an Existing Network on page 14
• Use WPS to Add a Computer to the Extender’s Wireless Network
• Extender Wireless Settings
• Extender IP Address Setup
• Status Screen
• Network Devices
• Back Up and Manage Extender Settings
• Set the Password
• Upgrade the Firmware
• Advanced Wireless Settings
To change settings, connect the extender to your computer and use your Internet browser to go
to http://www.mywifiext.net as described in
Connect a PC to the Extender with an Ethernet
Cable on page 8.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)