NETGEAR WN2000RPTv2 - Factory Settings and Technical Specifications; Factory Settings

28
A
A. Factory Settings and Technical
Specifications
Factory Settings
You can press and hold the Restore Factory Settings button on the rear panel for 7
seconds. The extender resets, and returns to its factory settings.
Table 4.
Factory Settings
Smart Wizard Enabled
Wireless Wireless communication Enabled
Wireless Network Name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Country/Region United States (varies by region)
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps