NETGEAR WN2000RPTv2 User Manual

Extender Network Settings
21
Universal WiFi Range Extender WN2000RPT
Show Statistics
On the Status screen, click Show Statistics to display the following screen:
Table 3. Show Statistics Fields
Field Description
LAN or WLAN (Port) The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current line utilization—percentage of current bandwidth used on this
port.
Rx B/s The average line utilization for this port.
Up Time The time elapsed since the last power cycle or reset.
Poll Interval Specify the poll interval frequency. If you change this value, click Set
Interval so that your change takes effect.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)