NETGEAR WN2000RPTv2 User Manual

Extender Network Settings
14
Universal WiFi Range Extender WN2000RPT
Connect the Extender to an Existing Network
You can wirelessly connect the extender to your home network.
1. Select Setup > Connect to an Existing Network. The extender scans for wireless
networks, and displays a list.
If your wireless network is not on the list, and it is up and running, see Positioning Your
Extender on page 7 for suggestions.
2. Click the radio button to select your network from the list and click Continue.
If you selected the manual option, you are prompted to type the network name (SSID)
and to enter the password to access it:
3. Enter your network’s passphrase or key and click Continue.
The extender joins your wireless network.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)