NETGEAR WN2000RPTv2 User Manual

Getting Started
10
Universal WiFi Range Extender WN2000RPT
Use the Setup Wizard
The Setup Wizard can help you set up your extender to connect to a wireless network. For
information about more configuration options, see Chapter 2, Extender Network Settings.
 To use the Setup Wizard:
1. Select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
installation guide.
2. Either select a network from the list, or select the Manually input my wireless SSID radio
button and type the SSID.
3. Enter the passphrase for your wireless network and click Continue. The next screen
displays:

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)