16
Connect Ethernet-Enabled Devices
After the extender is connected to your existing WiFi network, you
can use the extender to connect up to four devices wirelessly to your
wireless router or access point.
To connect an Ethernet-enabled device to your WiFi router
or access point:
1. Set up the extender.
For more information, see Place the Extender and Apply Power
on page 7.
2. Connect the extender to an existing WiFi network.
For more information, see Connect to an Existing WiFi Network
on page 7.
3. Plug the Ethernet cable from an Ethernet-enabled device to an
Ethernet port on the extender.
The Ethernet-enabled device connects to the router or access
point.
To Next Page
Loading...
