NETGEAR WN2500RP Installation Guide

7
Install the WiFi Extender
Place the extender, apply power, and connect it to your WiFi network.
Place the Extender and Apply Power
1. Place your extender in the same room as your WiFi router.
Note: Proximity to the WiFi router is required only during the
initial setup process.
2. Connect the power adapter to the extender and plug it into an
electrical outlet.
The Power LED lights solid green.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the
extender to your existing WiFi network. You can do this in one of two
ways:
• Connect with WPS. For more information, see Connect with
WPS on page 8.
• Connect with the genie web browser setup. For more
information, see Connect with NETGEAR genie Smart Setup on
page 10.

NETGEAR WN2500RP Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Bandwidth	2.4 GHz
Rack mounting	No
Minimum system requirements	Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, Google Chrome 11.0
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WEP, WPA, WPA2-PSK
Certification	CEC, RoHS, WEEE
Product color	Black
LED indicators	LAN, Link, Power, WLAN

Weight and Dimensions

Depth	153 mm
Width	223 mm
Height	31 mm
Weight	370 g