NETGEAR WN2500RP Installation Guide

19
Will the extender work if I connect it to the router with an
Ethernet cable?
No. The extender is designed to connect wirelessly to the router or
access point.
What are the user name and password to log in to the extender?
The user name is admin, and the default password is password.
Both are case-sensitive.
How do I restore the extender to its factory default settings?
1. Use a sharp object such as a paper clip to press and hold the
Factory reset button on the extender for at least five seconds
until the Status LED blinks amber.
2. Release the Factory reset button and wait for the extender to
reboot.
The extender resets and returns to the factory default settings.
You can now access the extender from your web browser using
the factory default settings.

NETGEAR WN2500RP Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Bandwidth	2.4 GHz
Rack mounting	No
Minimum system requirements	Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, Google Chrome 11.0
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WEP, WPA, WPA2-PSK
Certification	CEC, RoHS, WEEE
Product color	Black
LED indicators	LAN, Link, Power, WLAN

Weight and Dimensions

Depth	153 mm
Width	223 mm
Height	31 mm
Weight	370 g