NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
2-6 Network Connections and Wireless Security
v1.0, October 2008
You can use either a push button or PIN entry to connect using WPS:
• Push Button Configuration. Press a push button or push dome on the access point or router,
or click an on-screen button in the software. This is a fairly new technology, so not all access
points and routers provide a push button.
• PIN entry. Use the wireless PCI adapter’s Personal Identification Number (PIN).
Using a WPS Push Button to Connect to a Wireless Access Point or Router
To join a network using a push button:
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
2. Select Yes to use WPS, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. Do either of the following:
– Press the push button on the access point or router.
– Log in to the access point or router that you have selected:
– From the router’s main menu, select Add WPS Client.
– Follow the screens, select Push Button.
– Click the icon on the Add WPS Client screen.
5. Within 2 minutes, return to the WN311B Smart Wizard screen, and click .
The Smart Wizard initiates your wireless connection.
Figure 2-4
To Next Page
Loading...
