NETGEAR WNCE3001 User Manual

12
2
2. Advanced Settings
To change advanced settings, connect the Internet adapter to your computer, and use your
Internet browser to go to http://www.mywifiext.net as described in Prepare to Change Your
Internet Adapter Settings on page 9.
Device Status Screen
When you connect to http://www.mywifiext.net, after the automatic firmware check, the
Device Status screen displays:
This screen shows the current settings and the status of your Internet adapter.
• You can click Show Statistics to see device performance statistics such as the number
of packets sent and number of packets received for each port. See Show Statistics on
page 14.
• Click DHCP Connection to see information about your current DHCP connection. See
DHCP Connection Status on page 15.

NETGEAR WNCE3001 Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Ethernet LAN (RJ-45) ports	1
Chipset	-
Internal	No
Product color	Black
LED indicators	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency range	2.4 - 5 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100BaseT(X)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	100 Mbit/s
Supported data transfer rates	10/100 Mbit/s
Windows operating systems supported	Windows 8
Cables included	LAN (RJ-45), USB

Weight and Dimensions

Depth	29 mm
Width	73 mm
Height	102 mm
Weight	61.7 g