NETGEAR WNDR3400v3 User Manual

Hardware Setup
13
N600 Wireless Dual Band Router WNDR3400v3
Back Panel
The back panel has the connections shown in the following figure.
USB port
Restore Factory Settings button. Press and hold this
button for about 5 seconds to reset the router to its factory
default settings.
WiFi On/Off button
Four local area network (LAN) 10/100/1000 Mbps Ethernet
ports for connecting the router to your local computers.
Internet/Wide Area Network (WAN) Ethernet port for
connecting the router to a cable or DSL modem.
AC power adapter outlet for connecting the power adapter.
Power On/Off button.
See Factory Settings on page 109 for information about restoring factory settings.

NETGEAR WNDR3400v3 Specifications

General

Model	WNDR3400v3
Category	Wireless Router
WiFi Technology	802.11n
Frequency Band	2.4GHz and 5GHz
USB Port	1 x USB 2.0
Antenna	Internal
VPN Support	No
Security	WPA/WPA2
WiFi Speed	300 Mbps
Ethernet Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN