EasyManuals Logo

NETGEAR WNR2000v2 User Manual

NETGEAR WNR2000v2
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Customizing Your Network Settings 4-11
v1.0, January 2010
The Gateway IP Address field specifies that all traffic for these addresses should be
forwarded to the ISDN router at 192.168.1.100.
•A Metric value of 1 will work since the ISDN router is on the LAN.
Private is selected only as a precautionary security measure in case RIP is activated.
To add or edit a static route:
1. Select Static Routes under Advanced in the main menu. The Static Routes screen displays.
2. Click Add to expand the Static Routes screen.
3. In the Route Name field, enter a name for this static route. (This is for identification purposes
only.)
4. Select the Private check box if you want to limit access to the LAN only. If Private is selected,
the static route is not reported in RIP.
5. Select the Active check box to make this route effective.
Figure 4-5
Figure 4-6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNR2000v2 and is the answer not in the manual?

NETGEAR WNR2000v2 Specifications

General IconGeneral
BrandNETGEAR
ModelWNR2000v2
CategoryNetwork Router
LanguageEnglish

Related product manuals