NETGEAR WNR2000v2

NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Customizing Your Network Settings 4-14
v1.0, January 2010
2. Log into the wireless router base unit, under the Advanced heading, select Wireless
Repeating Function to display the Wireless Repeating Function screen.
3. In the Wireless Repeating Function screen (depending on the frequency you want to use),
select the Enable Wireless Repeating Function check box and the Wireless Base Station
radio button.
4. Enter the MAC address for one or more repeater units.
5. Click Apply to save your changes.
Figure 4-8