NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
16
Step 1 Enable the wireless network adapter on your PC and ensure that the
Wireless Zero Configuration tool is available. Right-click the Wireless
Network Connection icon and choose View Available Wireless
Networks from the menu.
Step 2 In the Wireless Network Connection page, click Refresh network list
and the network list is refreshed. The default SSID of the wireless router
is NETGEAR. Select the wireless router that you want to connect and
click Connect. The default wireless security mode is None, and you can
connect the wireless router directly without the encryption key in this
mode. If the wireless router is encrypted, you need to enter the correct
key to connect to the wireless router.