Netgear WNR612 Wireless Router User Manual
73
6.7.2 Wireless Repeater
Wireless distribution system (WDS) enables interconnection between APs in an
IEEE 802.11 wireless network. It extends the wireless network through several APs,
without connection of wired backbone network. This function is also called wireless
repeating or bridging.
Click Wireless Repeating Function on the left pane of the page to display the
following page.
The following table describes parameters in this page:
Field Description
Enable Wireless
Repeating Function
Enable or disable wireless repeating.
If the channel is set to Auto, this function cannot be
enabled. If you try enabling the function when the
channel is set to Auto, the system automatically
To Next Page
Loading...
