NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
48
Field Description
PassPhrase Enter 8-63 characters or 64 hexadecimal digits.
WPA-PSK (TKIP) + WPA2-PSK (AES): It allows the client to use WPA-PSK
(TKIP) or WPA2-PSK (AES).
The following table describes parameters related to the WPA-PSK (TKIP) +
WPA2-PSK (AES) mode:
Field Description
PassPhrase Enter 8-63 characters or 64 hexadecimal digits.
 Note:
After wireless setting is complete on the router, a host in the wireless network
must have consistent wireless settings, including the SSID, with the router if the
host wants to connect to the router. If the router has security settings, the host
in the wireless network must have consistent security settings. For example,
the passwords set on the host and the router must be the same. Otherwise, the
host cannot connect to the router.
6.4.3 Guest Network
If you enable guest network, a visitor can use Internet connection in your home
without knowing your wireless password.